https://doi.org/10.1016/j.jmatprotec.2024.118344
Journal: Journal of Materials Processing Technology, 2024, p.118344
Publisher: Elsevier BV
Authors:
- C.P. Martendal
- P.D.B. Esteves
- L. Deillon
- F. Malamud
- A.M. Jamili
- J.F. Löffler
- M. Bambach
Funder ETH Board
List of references
- Al-Jamal, Characteristics of the bond in Cu-H13 tool steel parts fabricated using SLM, CIRP Ann. Manuf. Technol., № 57, с. 239
https://doi.org/10.1016/j.cirp.2008.03.010
- Anstaett, Fabrication of 3D multi-material parts using laser-based powder bed fusion, с. 1548
- Bachmann, Texture analysis with MTEX- Free and open source software toolbox, с. 63
- Basinski, The lattice expansion of iron, : Proc. R. Soc. Lond. A., с. 459
- Bosco, Rapid solidification of immiscible alloys, J. Magn. Magn. Mater., № 262, с. 64
https://doi.org/10.1016/S0304-8853(03)00020-9
- Busi, Frame overlap Bragg edge imaging, Sci. Rep., № 10
https://doi.org/10.1038/s41598-020-71705-4
- Chen, Influence mechanism of process parameters on the interfacial characterization of selective laser melting 316L/CuSn10, Mater. Sci. Eng. A, № 792
https://doi.org/10.1016/j.msea.2020.139316
- Chen, Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding, Met. Mater. Trans. A Phys. Met. Mater. Sci., № 44, с. 3690
https://doi.org/10.1007/s11661-013-1693-z
- Chen, Interfacial ferrite band formation to suppress intergranular liquid copper penetration of solid steel, J. Alloy. Compd., № 773, с. 719
https://doi.org/10.1016/j.jallcom.2018.09.282
- Colopi, Limits and solutions in processing pure Cu via selective laser melting using a high-power single-mode fiber laser, Int. J. Adv. Manuf. Technol., № 104, с. 2473
https://doi.org/10.1007/s00170-019-04015-3
- Fredriksson, On the mechanism of liquid copper penetration into iron grain boundaries, Scand. J. Metall., № 30, с. 41
https://doi.org/10.1034/j.1600-0692.2001.d01-36.x
- Galbusera, The influence of novel beam shapes on melt pool shape and mechanical properties of LPBF produced Al-alloy, J. Manuf. Process, № 85, с. 1024
https://doi.org/10.1016/j.jmapro.2022.12.007
- Grünewald, Influence of ring-shaped beam profiles on process stability and productivity in laser-based powder bed fusion of AISI 316L, Metals, № 11
https://doi.org/10.3390/met11121989
- Gu, Laser additive manufacturing of metallic components: Materials, processes and mechanisms, Int. Mater. Rev., № 57, с. 133
https://doi.org/10.1179/1743280411Y.0000000014
- Gupta, Gamma ray induced modifications in copper microwires synthesized using track-etched membrane, Vacuum, № 148, с. 239
https://doi.org/10.1016/j.vacuum.2017.11.031
- Hovington, CASINO: A new Monte Carlo code in C language for electron beam interaction - Part I: Description of the program, Scanning, № 19, с. 1
https://doi.org/10.1002/sca.4950190101
- International Organization for Standardization, 2018. ISO 8249:2018(en) Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.
- Kain, Stress corrosion cracking (SCC) in stainless steels, с. 199
- King, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J. Mater. Process Technol., № 214, с. 2915
https://doi.org/10.1016/j.jmatprotec.2014.06.005
- Lassègue, Laser powder bed fusion (L-PBF) of Cu and CuCrZr parts: Influence of an absorptive physical vapor deposition (PVD) coating on the printing process, Addit. Manuf., № 39
- Li, Microstructure and thermal properties of dissimilar M300–CuCr1Zr alloys by multi-material laser-based powder bed fusion, Int. J. Miner., Metall. Mater.
- Liu, Interfacial characterization of SLM parts in multi-material processing: metallurgical diffusion between 316L stainless steel and C18400 copper alloy, Mater. Charact., № 94, с. 116
https://doi.org/10.1016/j.matchar.2014.05.001
- Magnabosco, An investigation of fusion zone microstructures in electron beam welding of copper-stainless steel, Mater. Sci. Eng.: A, № 424, с. 163
https://doi.org/10.1016/j.msea.2006.03.096
- Malamud, Bragg edge imaging characterization of multi-material laser powder-bed fusion specimens
- Munitz, Liquid Separation Effects in Fe-Cu Alloys Solidified under Different Cooling Rates, Metall. Trans. B 18B, с. 565
https://doi.org/10.1007/BF02654269
- Munitz, Microstructure and phase selection in supercooled copper alloys exhibiting metastable liquid miscibility gaps, J. Mater. Sci.
https://doi.org/10.1007/s10853-012-6354-x
- Noecker, Functionally graded copper-steel using laser engineered net shaping TM process
- Payton, The backscatter electron signal as an additional tool for phase segmentation in electron backscatter diffraction, Microsc. Microanal., с. 929
https://doi.org/10.1017/S1431927613000305
- Rao, Copper Contamination Cracking in Austenitic Stainless Steel Welds Welding of austenitic stainless steel with cupro-nickel wire resulted in cracking, which was not detected by radiography, but subsequently leaked during pressure testing, Weld. J., с. 46
- Ren, Thermal flow characteristics and the evolution of laser absorption in laser powder bed fusion of Cu-Cr-Zr alloy, Int. J. Mech. Sci., № 216
https://doi.org/10.1016/j.ijmecsci.2021.106957
- Rinne, Investigations on laser welding of dissimilar joints of stainless steel and copper for hot crack prevention, J. Laser Appl., № 33
https://doi.org/10.2351/7.0000489
- Savage, W.F., Nippes, E.F., Mushala, M.C., 1978. Liquid-Metal Embrittlement of the Heat-Affected Zone by Copper Contamination. Welding Research Supplement 237s–245s.
- Slotwinski, Characterization of metal powders used for additive manufacturing, J. Res. Natl. Inst. Stand Technol., № 119, с. 460
https://doi.org/10.6028/jres.119.018
- Smallman
- Stuhr, The TOF-strain scanner POLDI with multiple frame overlap-concept and performance, Mater. Sci. Eng.: A, № 437, с. 134
https://doi.org/10.1016/j.msea.2006.04.069
- Sun, Solidification Microstructure Evolution of Undercooled Cu-15 wt% Fe Alloy Melt, Adv. Mater. Sci. Eng., № 2018
https://doi.org/10.1155/2018/6304518
- Wang, Enhancing the interface strength of additively manufactured 316 L/CuSn10 bimetallic components through heterogeneous microstructures, Addit. Manuf., № 78
- Wen, Laser powder bed fusion of immiscible steel and bronze: A compositional gradient approach for optimum constituent combination, Acta Mater., № 264
https://doi.org/10.1016/j.actamat.2023.119572
Publications that cite this publication
Coupling hot isostatic pressing and laser powder bed fusion: A new strategy to manufacture defect-free CuCrZr-316L steel multi-material structures
L. Deillon, N. Abando Beldarrain, X. Li, M. Bambach
https://doi.org/10.1016/j.matdes.2024.112914 ·
2024, Materials & Design, p.112914
Scopus
WoS
Crossref citations:0
Material dependent influence of ring/spot beam profiles in laser powder bed fusion
Lova Chechik, Karen Schwarzkopf, Richard Rothfelder, Jonas Grünewald, Michael Schmidt
https://doi.org/10.1016/j.addlet.2024.100211
2024, Additive Manufacturing Letters, p.100211
WoS
Crossref citations:0
Temporal modulation of the laser emission power for microstructural manipulation in powder bed fusion
Leonardo Caprio, William Reynolds, Ali Gökhan Demir, Adam Clare, Barbara Previtali
https://doi.org/10.1016/j.jmatprotec.2024.118448
2024, Journal of Materials Processing Technology, p.118448
Scopus
WoS
Crossref citations:0
Laser powder bed fusion of planar bi-metallic thermally auxetic lattice structures
M. Bambach, Michael R. Tucker
https://doi.org/10.1016/j.cirp.2024.04.023 ·
2024, CIRP Annals
Scopus
WoS
Crossref citations:0
Find all citations of the publication
About this publication
Number of citations | 2 |
Number of works in the list of references | 38 |
Journal indexed in Scopus | Yes |
Journal indexed in Web of Science | Yes |